(501) 315-7213

Power generators are essential devices that provide electricity during power outages or in remote areas without access to the grid. However, like any mechanical equipment, generators can experience issues that may hinder their performance. Troubleshooting these problems and performing simple DIY fixes can help ensure your generator operates efficiently and reliably when needed. In this guide, we will cover some common generator issues and the steps you can take to resolve them.

 

Issue: The generator engine starts, but there is no power output.

 

Possible Causes:

  1. a) Overloaded generator: The combined power demand of connected devices exceeds the generator’s capacity.
  2. b) Faulty circuit breaker: The circuit breaker may have tripped due to a power surge or overload.
  3. c) Faulty Automatic Voltage Regulator (AVR): The AVR regulates the generator’s voltage output; if it malfunctions, it can lead to no power generation.

 

DIY Solution:

  1. a) Disconnect some devices: Reduce the connected load to ensure it’s within the generator’s capacity.
  2. b) Reset the circuit breaker: Locate the circuit breaker and reset it if it has tripped. If the problem persists, consult a professional.
  3. c) Check and clean the AVR: Locate the AVR on the generator and inspect for any damage or loose connections. Clean the contacts or replace the AVR if necessary.

 

Issue: The generator has difficulty starting or requires multiple attempts before it starts.

 

Possible Causes:

  1. a) Stale fuel: Old or contaminated fuel can cause starting issues.
  2. b) Dirty air filter: A clogged air filter restricts airflow to the engine, making starting difficult.
  3. c) Spark plug issues: Fouled or damaged spark plugs can prevent proper ignition.

 

DIY Solution:

  1. a) Replace the fuel: Drain the old fuel from the tank and replace it with fresh, clean fuel.
  2. b) Clean or replace the air filter: Remove the air filter, clean it with compressed air or soapy water, and ensure it’s completely dry before reinstallation. If it’s damaged, replace it.
  3. c) Inspect and clean/replace spark plugs: Remove the spark plugs, clean them using a wire brush, and check the electrode gap. If they are worn out or damaged, replace them with new ones.

 

Issue: The generator starts but stalls shortly after.

 

Possible Causes:

  1. a) Low oil level: Some generators have a low oil sensor that shuts down the engine when the oil level is insufficient.
  2. b) Dirty fuel filter: A clogged fuel filter restricts fuel flow and may cause engine stalling.
  3. c) Carburetor issues: A dirty or misadjusted carburetor can lead to engine problems.

 

DIY Solution:

  1. a) Check and add oil: Ensure the oil level is sufficient and meets the manufacturer’s recommendations.
  2. b) Clean or replace the fuel filter: Locate the fuel filter, clean it if it’s reusable, or replace it with a new one.
  3. c) Clean and adjust the carburetor: If you’re comfortable, remove the carburetor, clean it with carburetor cleaner, and adjust it according to the manufacturer’s guidelines.

 

Troubleshooting common power generator issues and implementing DIY solutions can save you time and money while ensuring your generator functions optimally. However, always prioritize safety and refer to your generator’s user manual before attempting any repairs.

If you encounter complex issues or lack the necessary expertise, it’s best to seek professional assistance to avoid further damage and ensure the safety of your generator’s operation. Regular maintenance and periodic inspections will also prolong the life of your generator and keep it ready to provide reliable power when you need it most. Call Northside Power today to learn more.